The grey fabric inspection report should have two functions. One is that we can preliminarily judge from the report whether the quality of this grey fabric can meet the processing requirements of the specific order. If there is an adjustment, we should try our best to adjust according to the bleaching, color, flower, or color. The depth of the slabs can be used in stages to reduce quality loss; The other is to clarify the responsibilities for the major problems detected in the grey inspection report, and can promptly submit a return, replacement, or other reasonable requirements to the grey to reduce the quality problems caused by the gray fabric The quality risk to the finished printing and dyeing products.
If the trader only buys the finished product from the printing and dyeing factory, that is, the printing and dyeing factory will be in charge of grey fabric, there is no need to pay attention to the quality of the grey fabric. The problems in production include the quality of the grey fabric. The printing and dyeing factory will handle it by itself without having to say anything to the trader. The trader only needs to check and accept the quality of the dyed and printed finished fabric according to the contract. If the trader purchases the grey fabric by themselves and processes it in the printing and dyeing factory, that is, it is usually said that the fabric is processed, and the quality of the grey fabric needs to be paid attention to and inspected.
The printing and dyeing factory will report to the customer as soon as possible when they find the quality problems through the grey inspection and send the inspection report together with important defect samples to the customer for confirmation. If it is a general problem, the trader will agree to continue the production with the printing and dyeing factory and record the problem; if it is a more serious quality problem, the trader will contact the billet supplier, sometimes with the billet supplier to the billet inspection site After the inspection, the treatment plan is determined.
In the grey inspection, the width, yarn count, warp and weft density, and strength of the physical indicators of the grey cloth were found. If there are any doubts about the square meter weight and other indicators, attention should be paid to them, and they should be checked carefully to prevent errors in the incoming billet specifications. For light fabrics, pure cotton poplin, and other varieties, if you want to use for sanding processing, you must pay special attention to the strength data of the grey fabric, because once the strength of the gray fabric is lower than the normal value, the strength of the finished fabric after the sanding process is likely to not reach To the customer's request.